Operation Instructions - Uberhaus 15435000 Guide De L'utilisateur

Before starting operations in this section:
1) Find a place where there is power supply nearby.Install window kit as per Installation
instructions on page 6.
2) Insert the power cord into an appropriate grounded AC115V/60Hz socket;
3) As shown in Fig. 9, take the stopper off the hole, then connect drain hose well (only for
using heating mode).
4) Press the POWER button to turn on the air conditioner.
1.Before using
Notice:
- Operation temperature range:
Maximum heating
Make sure that the exhaust hose has been mounted properly.
Cautions for cooling and dehumidifying operations:
- When switching between cooling and dehumidifying functions, keep an interval of at least
3 minutes before restarting the air conditioner.

Operation Instructions

Maximum cooling
35°C (95 )
O
F
27°C (81 )
O
F
Minimum cooling
18°C (64
Minimum heating
7°C (45
O
8
Fig.9
)
O
F
)
F