Speaker Level Connection (I I I I ) - Pioneer S-W1EX Mode D'emploi

SPEAKER LEVEL CONNECTION (
This is a connection to the speaker terminals on the
stereo amplifier or receiver.
Amplifier's or Receiver's SPEAKERS terminals
R
_
+
To right speaker
system
S-W1EX
NOTES:
• When the power of the stereo amplifier is turned off
before the power of this unit is switched off, a shock
sound may be generated. In this case, lower the
subwoofer volume or turn off the power of this unit. If
the stereo amplifier has a switched outlet, connect
the power cable of this unit to this outlet.
• When the subwoofer volume is set to an extremely
high level, howling may be caused when the power of
the stereo amplifier is turned off or when the speaker
switch is turned on. To prevent this, lower the
subwoofer volume or turn off the power of this unit
before turning off the power of the stereo amplifier.
Also, when using this unit at a high level, do not turn
off the speaker switch of the stereo amplifier.
• Do not turn up the bass on the stereo amplifier or
receiver. If the stereo amplifier or receiver has no
output margin, sound distortion is apt to occur.
Adjust the bass level with the unit's VOLUME knob.
• When the LINE LEVEL INPUT terminal is connected,
the SPEAKER LEVEL INPUT terminals cannot be
used.
All manuals and user guides at all-guides.com
)
ı ı ı ı
Connect speaker
cords 2 at a time.
L
_
+
+
To left speaker
system
_
Speaker cords
Stereo amplifier or Receiver
Right Speaker system
_ +
S-W1EX
Supplied AC power cord
Connect the unit to the stereo amplifier's or receiver's
speaker terminals at the same time the left and right
speakers are connected.
1. Use two sets of speaker cords (not supplied) to
connect the Right speaker system and the SPEAKER
LEVEL INPUT R of the S-W1EX to the right speaker
terminals of the stereo amplifier/ receiver. Do the same
for Left speaker system.
• Make sure L (+), L (–), R (+), R (–) are correctly
aligned.
NOTE:
• If the stereo amplifier or receiver has 2 sets of speaker
terminals (A, B) and these are connected to empty
terminals on the unit and "A + B" is selected with the
speaker switch, sound may not come out of the left/
right speakers, depending on the stereo amplifier or
receiver being used (a stereo amplifier or receiver is
constructed so that, when "A + B" is selected with
the speaker switch, A and B are in series
connection).
CAUTION
These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
R L
Left speaker system
_
+
To AC socket
D3-4-2-2-3_A_En
9
En