Brady BMP 21-LAB Guide De Démarrage Rapide page 4

English
A/C Power
1. Insert the round end of the optional adapter cable into
the plug-in port on the left side of the printer.
2. Plug the other end of the cord into an electrical outlet.
CHANGING THE LABEL CARTRIDGE
1. Turn the locking lever to the left to unlock the cartridge.
2. Push the eject button on the back of the printer.
3. Lift the cartridge out of the printer.
4. Place a new cartridge in the cartridge bay and push
down until the cartridge snaps into place.
5. Turn the locking lever up (to the right).
Lanyard
If using a lanyard, attach it at the base
of the printer.
2
®
BMP 21-LAB