Sony VPL-VW1100ES Guide De Référence Rapide page 48

5
Loosen the 3 screws on the lamp with
the Phillips screwdriver. Hold up the
handle, then pull the lamp straight out.
Note
Hold the lamp by the handle to remove and
attach it.
6
Push in the new lamp by the handle
securely until it reaches the end, and
then tighten the 3 screws.
Note
Be careful not to touch the optical block
inside the unit.
22
US
Handle
7
Close the lamp door, (inner cover) and
then tighten the screw.
8
Close the lamp cover.
9
Wipe dust off the ventilation holes
(intake) with a soft cloth.
Ventilation holes (intake)