Aqua Medic Ocean Light LED/twin Mode D'emploi page 11

4.2. Mounting of the aquarium fitting:
Pict. 3: Ocean Light LED incl. aquarium fitting
1. Fittings
2. Brackets (adjustable in height)
3. Fixing screws for fittings
4. Allen screws for fixing the brackets
The brackets (pict. 3, No. 2) are pushed into the guide rails of the Ocean Light LED. Then, the
requested height is adjusted by the Allen screws in the lateral openings (4) of the fittings. An Allen
key for locking is included. The fittings (3) are placed on the side panes of the aquarium. The
required distance is achieved by moving the brackets in the guide rails. By using the fixing screws
(3) a safe hold is provided.
4.3. Assembling/changing the lamp
Broken LEDs can be exchanged only by the manufacturer.
Electric connection:
The Ocean Light LED can be connected to any safety socket or a timer, if automatic operation is
required. In case of using a timer, all LEDs will be switched on and off at the same time.
A separate control of white and blue LEDs is possible by using the controller sunrise Control. It
can be connected to the connection socket (pict. 1, No. 2) of the Ocean Light LED by a
control cable that is available as an accessory (Art.-No. 86604).
When working on the light, always pull all power plugs!
5. Maintenance and Care
Clean the glass regularly (caution: let it cool down) from residues of water splashes and
evaporation with a moistened cloth. Never use any additional cleaning agents!
11