HoMedics UHE-WM70 Manuel D'instructions Et Renseignements Concernant La Garantie page 7

How To Use
Warm Mist Button
Power ON/OFF Button
Plug unit in to a 120 volt AC electrical outlet. Press the POWER ON/OFF
on. Press the POWER ON/OFF
ATTENTION: When the water in the tank is almost empty, the humidifying function will power off
to indicate to the user to refill the tank.
Mist Adjustment Setting
Mist adjusts from Lowest output to Highest output. To increase the mist output, turn the MIST
adjustment knob clockwise. To decrease mist output, turn the MIST adjustment knob counter-
clockwise.
Mist Temperature Setting
When the humidifier is powered ON, it will be operating on the default setting—Cool Mist. To
change the Mist Temperature from Cool Mist to Warm Mist, press the WARM MIST
The mist temperature will change to Warm Mist, and WARM MIST button will be illuminated red.
To change the Mist Temperature back to Cool Mist, press the WARM MIST button again. The
mist temperature will change to Cool Mist, and the light in the WARM MIST button will turn off.
NOTE: Once warm mist is selected, it will take 20 minutes before the mist becomes warm.
Night Light
Press the NIGHT LIGHT (
POWER/MIST knob will glow softly. Press the NIGHT LIGHT button again to turn off.
Night Mode
Press the NIGHT MODE button
running at the set mist output level and temperature. Press the NIGHT MODE button again and
all LEDs will revert back to original setting.
Night Light
Illuminated Ring
button again to turn unit off.
) button once to turn on the night light. The surround around the
once and all LEDs will turn off. The unit will continue
( )
Night Mode Button
Mist Increase / Decrease
Adjustment Knob
Night Light
ON/OFF Button
Power ON/OFF Button
6
Fig. 2
button to turn unit
button.
( )