Gima 34250 Instructions De Fonctionnement Et Entretien page 3

and the table of applicable methods.
P4
Washing machine Heat disinfecting program
Automatic washing machines designed for medical equipment will normally
include program cycles for heat disinfection.
Boiling
Use clean water, heat and boil parts for 10 minutes to disinfect.
Chemical disinfecting
Follow the instructions of the manufacturer of the chemical disinfectant for dilution
and exposure time. After exposure of the mask parts to the chemical disinfectant,
rinse thoroughly in clean water to remove all residues.
Autoclaving
Use standard autoclaving equipment adjusted for max. 134°C.
Caution! Before autoclaving remove stopper from the inflation tube.
4.4 Drying and cooling
Leave the parts to dry and/or cool completely before reassembling the mask.
4.5 Inspection of parts
After cleaning, disinfecting and/or sterilizing carefully inspect all parts for damage
or excessive wear and replace, if necessary. Some methods may cause
discoloration of rubber parts without impact on their lifetime. In case of materials
deterioration e.g. cracking, the parts should be replaced.
4.6 Assembling
Reassemble the mask.
5. Specifications
Weight
Size2:app. 40 g.
Size 3: app. 62 g.
Size 4: app. 67 g.
Size 5: app. 78 g.
Size 6: app. 92 g
P5
Operating temperature range: -40°C to 50°C (­40°F to 122°F)
Storage temperature range: -40°C to 70°C (­40°F to 158°F)
Parts Materials
Mask dome: Polysulphone or Polycarbonate
Mask cuff: Silicone rubber
Mask connector: Silicone rubber
Hook: Stainless
Order Information:
34252
Durable Silicone Cushion Mask
34253
Durable Silicone Cushion Mask
34254
Durable Silicone Cushion Mask
34255
Durable Silicone Cushion Mask
34250
Durable Silicone Cushion Mask
NOTE: Polycarbonate is not a perfect durable material
The product life will vary due to different sterilization method.
#2:
22mm ISO connector
#3:
22mm ISO connector
#4:
22mm ISO connector
#5:
22mm ISO connector
#6:
22mm ISO connector