Worx WX856 Serie Notice Originale page 10

Place the switch in the OFF (O) position. Remove the
battery pack from the tool. Place the wool bonnet on
foam pad.
7. BUFFING AND POLISHING - REMOVING THE
WAX FROM THE SURFACE (SEE FIG. G)
NOTE: Wait until wax has dried to an even haze on
vehicle. Remove wax in the same order in which it
was applied.
Turn the polisher to the ON position. Polish and buff
the entire surface until all dried wax is removed.
Remove the bonnet from time to time and shake out
the residue.
NOTE: For best results, use long, sweeping strokes
in a criss-cross pattern when removing wax.
WORKING TIPS FOR YOUR
POLISHER
1. Always let the polisher work and do not force
it or apply excessive pressure on the polisher.
Preferably, use a light circular motion.
2. If pad absorbs too much wax, it will not last long,
and polishing is more difficult and takes longer.
3. If bonnet continually comes off pad, please try
with a new bonnet.
4. If the wax seems difficult to polish, apply wax in a
thin, even coat.
10
TROUBLESHOOTING
1. If the polisher does not abrade surface, checking
the bonnet. If the bonnet has been worn, replace
the new bonnet and try again.
2. If a fault can not be rectified, return the tool to an
authorized dealer for repair.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0
The recommended ambient temperature range for
the charging system during charging is 0
20V Cordless Orbital Buffer
C-45 C (32°F-113°F).
o o
C-40 C
o o
(32°F-104°F).
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description Battery operated Polisher
Type WX856 WX856.X (856-designation of
machinery, representative of Polishers)
Function Polishing
Complies with the following Directives:
2006/42/EC
2014/30/EU
2011/65/EU&(EU)2015/863
Standards conform to
EN 62841-1
EN 62841-2-4
EN 55014-1
EN 55014-2
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2020/02/08
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P . R. China
EN