Wi-Fi Dongle Udage - ITALFARAD PFC96evo Manuel Opérationnel

 The WI-FI dongle offers WI-FI access point capability for connection to PC, Tablet or
Smartphone. In addition to this function it also offer the possibility to store and transfer a
block of data from/to the PFC96evo regulator.
 Insert the interface WI-FI into the IR port of PFC96evo regulator on the front plate.
E
 Switch WI-FI dongle on by pressing the button for 2 sec.
N
 Wait until the LINK LED becomes orange flashing.
 Press 3 times consecutively and fast the dongle button.
 At this point the display of the PFC96evo regulator shows the first of the 6 possible com-
mands (D1...D6).
 Press
 Press
(OK?). Press once again
COD COMMAND
D1 SETUP DEVICE CX02
D2 SETUP CX02 DEVICE
D3 CLONE DEVICE CX02
D4 CLONE CX02 DEVICE
D5 INFO DATA CX02
D6 EXIT
 For additional details see WI-FI dongle operating manual..
Tel.+39 051 6618311 Fax +39 051 6605594 E-mail: italfarad@italfarad.com Web: www.italfarad.com
WI-FI dongle usage
to select the desired command.
to execute the selected command. The unit will prompt for a confirmation
to confirm or
DESCRIPTION
Copies Setup settings from PFC96evo regulator to WI-FI dongle.
Copies Setup settings from WI-FI dongle to PFC96evo regulator.
Copies Setup settings and working data from PFC96evo
Copies Setup settings and working data from WI-FI dongle to
Shows information about data stored into WI-FI dongle.
Exits from dongle menu.
ITALFARAD S.p.A. via IV novembre n.1 Minerbio Bo Italy
to cancel.
58