Causes And Rectification Of Faults; Disposal Of The Old Device; Guarantee - CASO DESIGN Pro3500 Touch Mode D'emploi Original

17.3 Causes and rectification of faults

The following table assists in localizing and rectifying minor faults.
Fault
Display is empty
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.

18 Disposal of the Old Device

Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for their
functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly, they could
be detrimental to human health and the environment. Therefore, do not put your old
device into the non-recyclable waste under any circumstances.
Utilise the collection point, established in your town, to return and recycle old
►
electric and electronic devices. If necessary, contact your town hall, local refuse
collection service or your dealer for information.
Ensure that your old device is stored safely away from children until it is taken
►
away.

19 Guarantee

For the caso Induction PRO3500 TOUCH we grant a Guarantee of 12 months for
commercial use, starting with the date of sale.
In case of an exclusively private use the warranty period is extended to 24 months.
We grant this guarantee regarding defects due to faulty manufacture or material.
Your legal warranty claims according to §439 ff. BGB-E are not affected by this.
This guarantee does not accept defects due to inappropriate treatment or use as well
as defects which do not influence the function or the value of the induction hotplate
essentially. Furtheron we do not grant a guarantee for wear parts or damage in
transit as well as for defects due to repairs which have not been effected by us.
In case of legitimate claims we will decide wether to repair the device or to send you
a new one.
Apparent defects have to be indicated within 14 days after delivery.
Additional claims will not be accepted.
caso Pro3500 Touch
Possible Cause
Power plug not plugged in
Fuse switch not switched on
Please note
Please note
To Rectify
Insert plug into mains socket
Switch on fuse switch
47