Cleaning; Troubleshooting; Safety Notices; Causes And Rectification Of Faults - CASO DESIGN Pro Slide 2100 Mode D'emploi Original

Attention
► If dampness penetrates into the device, this can damage the electronic components.
Please ensure that no liquid can enter the interior of the device through the ventilation
slots.
► Do not immerse the appliance, its cables and the plug in water or other liquids, and do
not put it in the dishwasher.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.

15.2 Cleaning

 Ceramic hob, Housing and Operating Panel
 Clean the hob, the housing of the device and the operating panel with a soft, slightly
damp cloth or a mild detergent. If there are accumulations of dirt (at ceramic hob), apply
white vinegar to the polluted zone.
Attention
► In order not to damage the plastic components, do not use any solvent-based cleaning
detergents such as, for example, petrol.
► Do not use any flammable, acidy or alkaline materials or substances near the device, as
this may reduce the service life of the device and lead to deflagration when the device is
turned on.

16 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

16.1 Safety notices

Attention
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and damages
to the device.

16.2 Causes and rectification of faults

In the event of a fault, an error code will appear in the display; it describes the cause
of the fault.
The following table assists in localizing and rectifying minor faults.
47