Percentages Function; Parameters Setting - BLAUSCAL AH Serie Manuel D'utilisation

pieces to obtain the total of pieces.
To count other pieces of a different weight unit, repeat the procedure.
To return to normal weighing mode, press the MODE key until the sign grams "g"
appears on the right side.

PERCENTAGES FUNCTION (%)

Once selected the percentage mode by pressing the MODE key, use the keys
UNITS or to choose between 100.0% or 100.00%.
Place the product, considered as 100%, on the pan and press the PCS key. The
symbol "Modo" will flash for a few seconds and then the balance will beep
indicating the procedure is finished.
From this moment, the balance is ready to use the percentage function. When the
sample value is less than 0.2d, the display shows "---or---%". It means that the
sample is too small, therefore, will need to add bigger samples.
Note: To exit from pieces-counting or percentages function, press the MODE key
to return to normal weighing mode.
To return to pieces-counting or percentages function, press the PCS key. The
balance will automatically memorize the previous data, so you can continue using
both functions.
The data memory will be deleted automatically when you switch from one mode to
the other.

PARAMETERS SETTING

Press the SETUP key to enter to parameters setting menu. Once it's pressed, the
display will show the message CAL.
Use the keys to choose the function.
8