Error Messages; Output Rs-232 - BLAUSCAL AH Serie Manuel D'utilisation

"bl.1"= Automatic backlight
"bl.2"= Backlight always on
"bl.3"= Backlight off

ERROR MESSAGES

The error messages are: "E1 . E2 . E5 . 0L".
These messages can appear if the platter is not installed properly or when the
environment is not adequate. Please, contact with your distributor.
OUTPUT RS-232C
Mode: signal EIA-RS-232 C's UART, or signal USB.
Format:
Baud rate: 1200, 2400, 4800 and 9600 bauds
Data Bits 7
Parity Bit: 1
Stop Bit: 1
Code Bit: ASCII
Input Pin: 2 (RxD)
Output Pin: 3 (TxD)
Signal Pin: 5 (Masa)
CABLE TO CONNECT THE PC TO THE BALANCE
PC
DELTA
9 Pins
Female
3
2
5
DATA FORMAT
BALANCE
DELTA
9 Pins
Male
2 (RxD)
3 (TxD)
5 (Grd)
13