Baud Rate Configuration; Filter Selection; Zero Correction Configuration; Auto-Zero Selection - BLAUSCAL AH Serie Manuel D'utilisation

BAUD RATE CONFIGURATION

Press the key until the screen shows the message "rate", then press the
ENTER key.
Use the keys to select the baud rate (1200, 2400, 4800 and 9600) and
press ENTER to confirm.
Press the ESC key to return to previous menu or to exit.
(Default value: 2400)

FILTER SELECTION

Press the key until the screen shows the message "FI 105 ", then press the
ENTER key.
Use the keys to select the range of stability (from 1 to 15), then press
ENTER to confirm.
Press the ESC key to return to previous menu or to exit.

ZERO CORRECTION CONFIGURATION

Press the until the screen shows the message "ZEro1", then press the
ENTER key.
Use the key to select the zero range (from 0 to 3 divisions). To confirm,
press the ENTER key.
Press the ESC key to return to previous menu or to exit.
ZEro1: correction of one division.
ZEro2: correction of two divisions.
ZEro3: correction of three divisions.
ZEro0: without correction.

AUTO-ZERO SELECTION

Press the key until the screen shows the message "trAC1", then press the
ENTER key
Use the keys to select the auto-zero tracking.
11