Auto-Sample Selection In Piece Counting; Backlight Configuration - BLAUSCAL AH Serie Manuel D'utilisation

Press the ENTER key to confirm.
Press the ESC key to return to previous menu or to exit.
(Default value: "2")
trAC0: it corrects deviations less than 1/3 of division.
trAC1: it corrects deviations less than 2/3 of division.
trAC2: it corrects deviations less than 1 division.
trAC3: it corrects deviations less than 4/3 of division.
trAC4: it corrects deviations less than 5/3 of division.
trAC5: it corrects deviations less than 2 divisions.
AUTO-SAMPLE SELECTION IN PIECES COUNTING
When the balance is in pieces-counting mode, this function allows making an
automatic small sampling when the quantity of pieces loaded on the pan are
inferior or equal to the initial quantity.
Press the key until the screen shows the message "A.C Y", then press the
ENTER key.
Use the
ENTER key to confirm.
Press the ESC key to return to previous menu or to exit.
(Default value: "YES")
A.C Y: automatic auto-sample
A.C N: auto-sample disabled.

BACKLIGHT CONFIGURATION

Press the key until the screen shows the message "b1.1", then press the
ENTER key.
Use the
3). Press the ENTER key to confirm.
Press the ESC key to return to previous menu or to exit.
(Default value: bl.1)
keys to select the desired mode ( Yes "Y" or Not "N" ). Press the
key to select the backlight mode, there are three options: 1, 2 and
12