Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DD-VPX vacuum pump
It is essential that the operating
instructions are read before the
tool is operated for the first time.
Always keep these operating
instructions together with the tool.
Ensure that the operating
instructions are with the tool when
it is given to other persons.
Parts of the DD-VPX
Supply cord
Vacuum hose with coupling
ON/OFF switch
Manometer (red/green ranges)
Float glass with water level indicator (red ball)
Water separator
Water drainage plug
Filter cover
Filter
Grip
Silencer
Contents
General information
Using the vacuum pump
Description
Maintenance
Declaration of conformity
Printed: 07.07.2013 | Doc-Nr: PUB / 5069649 / 000 / 00
General information
In these operating instructions, this symbol indi-
cates points of particular importance to safety. The
instructions at these points must always be observed
in order to avoid the risk of serious injury.
Caution: high voltage
The numbers refer to the illustrations. The illustrati-
ons can be found on the fold-out cover pages. Keep the-
se pages open while you read the operating instructions.
Using the vacuum pump
Page
This vacuum pump is designed for use with Hilti
7
diamond drilling systems equipped with a suitable vacuum
7
baseplate. The maximum permitted drilling diameter is
250 mm.
7
The following items are supplied: power tool, operating
8
instructions
9
9
Description
10
10
The following conditions must always be obser-
10
ved when the tool is in use:
10
- The tool must be connected to an alternating current
11
electric supply in compliance with the information
11
given on the type plate.
11
- The tool must not be used in places where the sur-
See cover
rounding conditions may present a risk of explosion.
7
Publicité
Chapitres
Table des Matières
