Basic Operations; Turning On The Power - JVC KD-AR800 Manuel D'instructions

1

Turning on the power

1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
(For KD-AR800)
(For KD-G700)
To operate the tuner (FM or AM),
see pages 10 – 12.
To play a CD,
see pages 13 – 16.
To play an MP3/WMA disc,
see pages 18 – 22.
• For KD-AR800/KD-G800
To operate the CD changer,
see pages 34 – 38.
To operate the external component—
LINE IN or SIRIUS, see page 39.
3
2
(For KD-G800)

BASIC OPERATIONS

3
Adjust the volume.
Volume level appears.
4
Adjust the sound as you want.
(See pages 23 – 25.)
To drop the volume in a moment
Press briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press and hold
second.
"SEE YOU" appears, then the unit turns off.
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
To increase the volume
To decrease the volume
Volume level indicator
for more than one
7