Publicité
Step 14
å
Carefully stand your unit upright.
å
NOTE: Be sure both INTERLOCK MECHANISMS are positioned exactly as shown in the enlarged diagram before
inserting the drawers.
å
NOTE: Before inserting a drawer, be sure the INNER CARTRIDGE in the EXTENSION RAIL on your unit is all the way
forward. The INNER CARTRIDGE should be against the BLACK TAB.
å
To insert a drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS on the
unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all the way
in, then it will slide in and out easier.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with a damp cloth. Wipe dry.
And to celebrate, why not share your success story at sauder.com or
Move the inner cartridge into place against the black tab.
Front
Black tab
INTERLOCK MECHANISM
The bottom lever should be forward
towards the front on both sides of the unit.
Page 18
Inner cartridge
NOTE: Both DRAWER ACTUATORS
on the lower drawer sides should be
above the drawer slides.
www.sauder.com/service
Extension Rail
50 lbs.
G
40 lbs. each
H
428241
Publicité
