AquaScape AquaForce 4000-8000 Instructions Et Entretien page 5

Model Number
Item Number
Average Pond Size Recommendation
Maximum Flow Rate
Maximum Head Height
Motor Type
Wattage
Amperage
Power Cord Length
Discharge Hose Diameter
Warranty
*Wattage range depending on remote-control fl ow setting
Typical Installation in an
Ecosystem Water Garden
• The AquaForce Pump is designed to
®
be submerged directly into the pond.
To maximize pond circulation, locate
the AquaForce pump as far away as
®
possible from the location of the water
entering back into the water feature.
• The AquaForce includes a wide assortment of fi ttings to
®
choose from. Select the appropriate fi tting(s) needed for
your application.
• The threaded collar, on all of the fi ttings, enables the
AquaForce pump to be installed and removed without the
®
need for any tools. Do not use tools to attach the fi ttings onto
the pump discharge. Fittings need to be hand-tight only.
Multi Hose Adapter
www.aquascapeinc.com |
AquaForce
• It is recommended
that the pump NOT be
positioned in the deepest
area of the pond. This
will protect the fi sh by
preventing the pond from
completely draining in
the case of leak in the
plumbing or fi lter. Bricks
or stones can be used,
if needed, to raise the
pump up off the bottom
of the pond.
CAN 1-866-766-3426 |
Pump Specs
®
• The extremely versatile Rotational Ball Outlet provides you
the ability to adjust the pump discharge to the perfect
position that your water feature set-up requires. Loosening
the threaded collar allows you to rotate the upper half of the
ball. A fl at rubber washer seal is included to ensure a hand-
tight and leak-free connection. Make sure the fl at rubber
washer is in place before installing the fi ttings.
US 1-866-877-6637
4000-8000
#91104
3,500 gallons and larger
7,793 GPH
28 ft
Asynchronous
500-660*
5.5
20 ft
1", 1.25", 1.5", 2"
3 Year Limited
5