Gaggia Velasca Prestige RI8263 Mode D'emploi page 26

English
26
The coffee grounds
container full icon remains
displayed.
The brew group cannot be
removed.
The brew group cannot be
inserted.
The coffee has too little
crema or is watery.
The coffee grounds container was
emptied while the machine was
switched off.
The coffee grounds container was
placed back too fast.
The brew group is not positioned
correctly.
The coffee grounds container is not
removed.
The brew group is not in the correct
position.
The machine is still in the descaling
procedure.
The grinder is set to a coarse setting.
The coffee blend is not the correct
one.
The machine is performing its self-
adjustment.
Always empty the coffee grounds
container while the machine is ON.
If the coffee grounds container
is emptied while the machine
is switched off, the coffee cycle
counter is not reset. In that
case, the 'empty coffee grounds
container' message will stay on the
display even though the container
is not full.
Do not place back the coffee
grounds container until the screen
message prompts you to put it
back
Close the maintenance door.
Switch the machine off and back
on again. Wait for the machine
ready screen to appear and then
remove the brew group
Remove the coffee grounds
container before removing the
brew group
The brew group was not put in
rest position before it was placed
back. Make sure that the lever is
in contact with the base of the
brew group and that the hook of
the brew group is in the correct
position.
Reset the machine by switching it
on and off. Place the drip tray and
the coffee grounds container back.
Leave the brew group out. Close
the maintenance door and switch
the machine on and off. Then try to
reinsert the brew group.
You cannot remove the brew
group when the descaling
process is active. First complete
the descaling process and then
remove the brew group.
Adjust the grinder to a finer setting.
Change the coffee blend.
Brew a few cups of coffee.