Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN G LI S H
Pivoting Head (Fig. 1, 3)
The pivoting head (c) provides light in any direction by rotating 180˚ in
both directions.
Magnets, Belt Hook and Stand
CAUTION: When magnet and belt hook is in use, do not
shake light. Personal injury or property damage may occur.
CAUTION: When light is hung by the magnet and belt
hook, do not shake the light or object that it is hanging
from. Do not hang the light from any electrical wires or
anything that it is not secure. Personal injury or property
damage may occur.
CAUTION: Only use the magnet and belt hook for hanging
the LED worklight. The magnet and belt hook are not
intended to support additional weight. Do not attach or
hang anything additional to the light or risk of breakage
may occur.
CAUTION: Do not use the magnet and belt hook to
reach with or use the magnet and belt hook to support
your weight in any situation.
Using the stand (b), belt hook (d) and magnets (e), the worklight can be
placed in multiple locations for ideal lighting.
The kickstand should be snapped into the home position if not in use,
as shown in Figure 1.
MAINTENANCE
Your D
WALT tool has been designed to operate over a long period of
E
time with a minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
The charger is not serviceable. There are no serviceable parts inside
the charger.
• Do not attempt to repair the worklight. To assure product safety
and reliability, repairs, maintenance, and adjustments should be
performed by authorized D
56
WALT service centers.
E
Publicité
Table des Matières
