Publicité
Les langues disponibles
Les langues disponibles
list of parts
Your pushchair is supplied in one carton. Some parts are packed inside the carry cot.
1. Pushchair chassis
2. Rear wheel x2
3. Front wheel x2
4. Seat unit
5. Basket
6. Seat unit hood
Note: Remove all cable ties securing parts before assembly.
Note: Wheels are shrink wrapped to protect cleanliness. Do not remove until you are satisfied with
the product. If removed, we regret we may not accept as non-faulty return.
1 - opening the chassis
Lay the chassis on clean floor (a).
Pull the front legs forward until a "click" is heard and the legs are locked in place (b).
Lift the handle upwards until a "click" is heard and the handle arms are locked in place (c).
WARNING: Ensure that all locking devices are engaged before use.
2 - fitting the rear wheels
To fit a rear wheel insert the pin into the wheel housing (a) until it locks in place. Repeat this with the
other rear wheel.
Note: Before use try to pull the wheels back to ensure they are securely locked in place.
To remove the rear wheels, press down on the levers at the bottom of the wheel housings (b) and
pull the wheels clear.
3 - fitting the front wheel assembly
To fit the front wheel assembly insert the pin at the top of the wheel assembly into the wheel
housing (a) until it locks in place.
Note: Before use try to pull the wheels down to ensure they are securely locked in place.
To remove the wheel assembly, push the button on the front of the wheel housing (b) and remove
the wheel assembly from the housing (c).
4 - using the parking brake
To apply the brake, lift the brake lever (a) until a "click" is heard and the brakes are applied. Test the
brake is engaged correctly by trying to push the pushchair forwards for a short distance.
To release the brake, squeeze the button (b) on the side of the brake lever housing.
NOTE: Always apply brake before loading or unloading a child from the pushchair.
5 - using the swivel wheel lock
Lift the lever (a). Swivel the wheel until it locks in the forward facing position. The wheel will now
only travel straight ahead (b).
Press down on the lever (c) to release the lock. The wheel will now swivel from side to side (d).
6 - fitting the basket
Place the basket over the frame. Note: The narrow end of the basket fits to the front.
Fasten the 3 poppers at the front (a).
Fasten the 3 poppers at the rear (b).
Fasten the fastener straps around frame near the centre hinges (c).
Re-fitting is a reversal of this procedure.
7. Footmuff liner
8. Footmuff cover
9. Bumper bar with cover
10. Carry cot frame
11. Carry cot apron
12. Carry cot mattress with cover
13. Carry cot liner
14. Carry cot raincover
15. Seat unit raincover
16. Car seat mounting adaptors
17. Changing bag
Publicité
