Description Of Device; Overview - Article Numbers; Unpacking; Mounting - Abus TVCC50011 Manuel Utilisateur

5. Description of device

5.1 Overview – article numbers
Article number
Resolution
WDR
DNR
Day/Night
(removable IR cut-filter)
Operating voltage

5.2 Unpacking

While you are unpacking the device please handle it with utmost care.
If you notice any damage of the original packaging, please check at first the device.
If the device shows damages, please contact your local dealer.

6. Mounting

6.1 Power supply

Before you start with the installation please make sure that the main voltage and the nominal
voltage of the camera comply together.
DC LEVEL
TVCC50011
(1) TVCC50011 is run by a 12 VDC / 24 VAC power supply. The polarity can be ignored.
In order to connect a 12 VDC power supply (DC Connector 5.5mm x 2.1mm) to the camera
you have to first install the included connector cable. Therefore you need to press the pins
and insert the cable ends into the terminals.
(2) TVCC50511 is run by a 110~240VAC power supply (preinstalled cable).
TVCC50011
650 TVL
46 dB (max.)
2D DNR

12VDC/24VAC
D/N LEVEL
MONITOR
POWER
12VDC VIDEO
24VAC
TVCC50511
650 TVL
46 dB (max.)
2D DNR

110-240VAC
D/N LEVEL
110~240VAC
DC LEVEL
TVCC50511
24
MONITOR
POWER
VIDEO