Télécharger Imprimer la page

Honeywell THERMAWAVE 850 Serie Mode D'emploi page 6

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
(CONTINUED)
EnergySmart
Mode -
®
The EnergySmart Mode is a smart thermostat that helps you save energy. Press SET to choose four
(4) comfort settings of 65° (18°), 70° (21°), 75° (23°), 80° (26°). The EnergySmart Mode is a smart
thermostat. The EnergySmart thermostat will automatically select the appropriate power level to best
accommodate your Desired Temperature. As the air temperature (Current Temp) in the room approaches
the Desired Temperature, the heater will automatically lower the power consumption to provide
consistent warmth without wasting energy.
The Current Temp Indicator will display the current room temperature.
To override the EnergySmart function, simply press SET to choose either OFF (
LOW or HIGH Continuous Heat.
SAFETY FEATURES
This heater is equipped with several devices and features for added protection:
• A tip-over switch that disables the heater if it is accidentally tipped –
• Model 850 Series - 2 way shut off disabled heater if tipped front or back directions
• Model 860 Series - 4 way shut off disables heater if tipped front, back or side to side directions
• A high temperature safety sensor prevents overheating.
• This heater is also equipped with a thermal cut-off fuse that will permanently shut down the heater
should it operate at a higher than normal temperature.
• This heater was built using a high temperature plastic and has a cool to touch housing and handle.
CLEANING AND STORAGE
We recommend that this heater be cleaned at least once a month and before off-season storage.
• Turn the heater OFF (
• Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES,
POLISHES OR ANY CHEMICAL SOLUTIONS.
• Before storing, clean the ThermaWave Heater using the above-mentioned steps. Wrap the cord
around the unit. Place in its original box and store it in a cool, dry place.
• This heater does not disassemble.
6
) or (
) and unplug it. Allow it to cool.
),

Publicité

loading

Ce manuel est également adapté pour:

Thermawave 860 serie