Wireless Display; Software Update - Salora 32LED9112CSW Mode D'emploi

again. Refer to Media Browser USB Playback section
for further information on file playback.
Subtitle files do not work if you watch video from
network through DLNA.
You can connect only one television with DLNA to
same network. If a problem occurs with DLNA network,
please switch on/off your television. Trick mode and
jump are not supported with DLNA function.
CAUTION:
There may be some PC's which may not be able to
utilize the DLNA function due to administrator and
security settings. (such as business PC's).
For best home network streaming with this set, the
supplied Nero software should be installed.

WIRELESS DISPLAY

Wireless Display is a standard for streaming video and
sound content by Wi-Fi Alliance. This feature provides
the ability to use your TV as wireless display device.
Using with mobile devices
There are different standards which enable sharing of
screens including graphical, video and audio content
between your mobile device and TV.
Plug the wireless USB dongle to TV first, if the TV
doesn't have internal WiFi feature.
Then press the Source button on the remote and
switch to Wireless Display source.
A screen appears stating that the TV is ready for
connection.
Open the sharing application on your mobile device.
These applications are named differently for each
brand, please refer to the instruction manual of your
mobile device for detailed information.
Scan for devices. After you select your TV and
connect, the screen of your device will be displayed
on your TV.
Note: This feature can be used only if the mobile
device supports this feature. Scanning and connecting
processes differ according to the programme you
use. Android based mobile devices should have the
software version V4.2 and above.
Internet Portal
You can access PORTAL mode using your TV. To
do this, an active internet connection is required.
Follow the steps on Connecting to a Wired/
Wireless(optional) Network section to connect
your TV to internet. After the connection is
established, you can select or view portal options.
Note: Broadband internet connection is required
for high quality viewing. Ensure that the internet
connection is made properly. You must set the
Country and Language data correctly in the
First Time Installation for the proper operation of
internet portal.
Press " " button on your remote control and
portal application options will be displayed.
Application options will be displayed as the template
below. Available applications' contents may change
depending on the application content provider.
Note on PIP Window
If you switch to portal mode while watching TV
channels, current programme will be displayed on
the PIP window. You can change channels using
P+/P- buttons.
Current HDMI content will be displayed on the PIP
window, if you switch to portal mode while watching
HDMI source.
Use the " " or " ", " " or " " to navigate between
the items on Portal screen. Press the OK button to
confirm your selection. Press the BACK button to go
to the previous screen.
Press the EXIT button to quit the Internet portal mode.

Software update

Your television can, through the antenna or cable, search
and provide updates.
Software update search via the user
interface
Simply go through the main menu. Choose Settings
and select other settings menu. In the Other
settingsmenu, select Software update and press
the OK button to open the Update options menu.
3 Search and update mode
When the TV set receives signal from the antenna. If
the Automatic search option in the Update options
menu is active, the television automatically turns on
at 3:00 a.m. and launches the search for broadcasting
channels in order to update the new software. If new
software is found and downloaded successfully, the
television begins to work with the new software version
when next it is turned on.
Note: If the television does not come on after the update,
disconnect it for two minutes, then connect it again.
English - 63 -