Table Des Matières; Description; Safety; Purpose Of This Manual - Greenlee 855GX IntelliBENDER Manuel D'instructions

Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information .....................................3-5
Grounding Instructions .................................................. 6
Specifications ................................................................ 6
Identification .................................................................. 7
Features ......................................................................... 8
Transporting Bender and
Pivoting Bending Head .................................................. 9
Setup ........................................................................... 10
Operation ................................................................10-16
Manually Selecting Conduit Type and Size.............. 12
Basic Programmed Bending .................................... 12
Fully Programmed Bending ................................13-15
Optional PVC-Coated Conduit Bending .................. 15
Squeeze Adjustment ................................................ 16
Illustrated Bending Glossary ....................................... 17
Bending Instructions ..............................................18-19
Additional Bending Instructions .............................20-22
Additional Bending Tables ......................................23-26
Maintenance ...........................................................27-29
Greenlee / A Textron Company

Description

The Greenlee 855GX IntelliBENDER
intended to bend 1" to 2" conduit and pipe. This bender
has the capability to accommodate the following types
of conduit and pipe:
• Electrical Metallic Tubing
• Intermediate Metallic Conduit
• Rigid Conduit
• Aluminum Rigid
• PVC-Coated Rigid Conduit
• Schedule 40 Pipe
• Stainless Steel Rigid
The 855GX includes a shoe to bend EMT, IMC, and rigid
conduit. In addition, shoes and roller supports are avail-
able for bending PVC-coated conduit.

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.

Purpose of this Manual

This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
Greenlee 855GX Electric Bender.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
IntelliBENDER is a registered trademark of Greenlee Textron Inc.
KEEP THIS MANUAL
2
855GX Electric Bender
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Electric Bender is
®