Features - Greenlee 855GX IntelliBENDER Manuel D'instructions

Features

• Single shoe bending of 1" to 2" EMT, IMC, and rigid
conduit.
• 1/2" to 2" PVC-coated conduit bending capability with
optional shoe group.
• Four large wheels for easy transportability.
• Waist level working height.
• Patented roller system automatically adjusts between
IMC and EMT conduit.
• Patent pending conduit size and type sensing system
allows for quick loading and bending to desired angle.
• No homing or initial setup required—just load conduit
and bend.
• Bender automatically compensates for springback—
simply bend to the desired angle.
• Squeeze adjustment allows for variations in conduit.
• Bright, adjustable contrast LCD display for easy
programmable bending input and dimensional illustra-
tions for making marks on conduit.
• Programmable memory will stop bender at any pro-
grammed angle.
• Common angles preset with one-touch selection.
Greenlee / A Textron Company
855GX Electric Bender
• Digital display shows bend angle on pendant.
• Computer will provide alignment mark dimensions for
stubs, kicks, offsets, three- and four-bend saddles,
and U-bends for any height, length, and angle.
Programmed for transfer to other 855GX benders.
Programmed bends can also be uploaded to bender
from bends programmed on a computer. Bends can
be saved on thumb drive through USB port.
• Removable patent pending pendant prevents
unauthorized use of bender. Pendant includes cord
strain relief and strong rare earth magnets for holding
on steel surfaces.
• Lockable storage area for pendant, instruction
manual, etc.
• Lifting bar provided for easy hoisting.
• Fork tubes provided for easy forklift mobility.
• Adjustable height handle for easy and comfortable
mobility.
• Rear wheel brake to securely keep bender in place
during use.
• Quick release retainers for bending shoe and rollers.
• Quick release lock pin to easily pivot bender between
vertical and horizontal positions.
8
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070