Care And Cleaning; Cleaning The Lint Filter; Cleaning The Outside Of The Machine - grandimpianti GD6 Manuel D'installation Et D'utilisation

Care and cleaning

Cleaning the lint filter

The lint filter must be cleaned after each load.
1. Grasp the filter holder handle and pull it
towards you to open the lint filter.
2. Open the lint filter. Use your thumb to press on
the edge as illustrated and pull it out.
3. Use your hand or a soft cloth to remove the lint
from all sides of the filter. If necessary, use a
damp sponge and a small amount of
washing-up liquid to remove any deposits. Dry
the filter thoroughly with a towel.
4. Close the lint filter before closing the door.

Cleaning the outside of the machine

Clean the outside of the machine and the
programme panel with a mild cleaner. Do not use
solvents, as these can damage the machine. Do
not hose down or spray the machine with water.
NOTE!
Do not allow dust to accumulate around the
machine. Keep the area around the tumble dryer
clean and cool; dust, heat and moisture prolong
drying times.
13