Concealed Installation - Kemper 131 00 Consignes De Sécurité Importantes Pour Le Montage

EN 3.2
1
Shutting off1.
1. Remove sign cap (3).
2. Insert hexagonal span-
ner (6mm width across
flats) into the authority
top part (4) and close
valve by turning it to the
right.
Cleaning of Valve Seat
2
By the closing of the valve,
the valve seat is autocatically
cleaned.
22 /88 – K410054000001-00 / 05.2022 – © www.kemper-olpe.de

Concealed Installation

Max. a half turn (10 teeth) to
the right: Corresponds to reduc-
tion of the value by 2 K.
Note!
After this, the valve has
again to be fully opened
(left turn to end position).
Note!
Do not over-tighten the
end position buffers!