Concealed Installation; Shutting Off - Kemper 130 Instructions D'installation Et D'utilisation

3.2

Concealed Installation

Shutting off

1
1. Remove sign cap (3).
2. Insert hexagonal span-
ner (6mm width across
flats) into the authority
top part (4) and close
valve by turning it to the
right .
2 Cleaning of Valve Seat
By the closing of the valve,
the valve seat is autocatically
cleaned.
22/88 – K410054000001-00 / 03.2021 – © www.kemper-olpe.de
Max. a half turn (10 teeth)
to the right: Corresponds to
reduction of the value by 2 K.
Note!
After this, the valve
has again to be fully
opened (left turn to
end position).
Note!
Do not over-tighten
the end position
buffers!