Wahl Adore 1872-0491 Mode D'emploi page 10

ENGLISH
f Remove the attachment comb (Fig. 6ⓑ) after every use
de
and lift the blade set out of the housing (Fig. 7ⓐ). Use the
cleaning brush to remove any cut hairs from the housing
opening and from the blade set (Fig. 8). The cleaning lever
en
can also be pressed. This allows the cut hairs that accumu-
late between the bottom blade and the top blade to be eas-
fr
ily removed using the cleaning brush (EASY CLEANING).
f Only wipe the appliance with a soft, slightly damp cloth.
it f The blade set using the hygienic spray.
f Oil the blade set with the blade set oil (Fig. 9).
es
f For a good and long-lasting cutting performance, it
is important to oil the blade set frequently.
pt
f If the cutting performance deteriorates after long
use despite regular cleaning and oiling, the blade
set should be replaced.
nl
Changing the blade set
da
1. Slide the blade set off the housing in the direction of the
arrow (Fig. 7ⓐ). Remove the blade set.
sv
2. Replace the blade set by hooking it into the housing and
pressing it down until it clicks into position (Fig. 7ⓑ).
no
Problem elimination
fi
Blade set is cutting badly or pulling hair out.
Cause: Blade set is dirty or worn out.
tr
f Clean and oil the blade set (Fig. 8/90); if this does not
resolve the problem, replace the blade set (Fig. 7).
pl
Battery operating time is too short.
cs
Carefully clean and oil the blade set (Fig. 8/9). A blade set that
is very dirty and has not been oiled can halve the available
battery operating time! If the blade set is clean and oiled and
sk
the battery operating time is still far too short, it is likely that the
batteries are nearing the end of their life.
hr
Battery operating time generally decreases at a
steady rate when used on a day-to-day basis. The
hu
batteries used here are specially designed for profes-
sional and everyday use, but are also affected by this.
sl
Skin injury
ro
Cause: Too much pressure on the skin.
f Reduce pressure when cutting close to skin.
bg
Cause: Damaged blade set.
f Check whether the blade edges were damaged during use
ru
and replace the blade set if necessary.
uk
Battery power indicator light does not light up.
Cause: Appliance has not been correctly placed on the charg-
et
ing stand.
f Ensure that the hand-held appliance has been correctly
placed on the charging stand.
lv
Cause: Charging contacts are dirty.
lt
f Clean the charging contacts on the appliance and on the
charging stand.
el
ar
10
Cause: Defective power supply.
f Ensure that the power supply unit is plugged into the mains
socket.
f Check the mains cable for possible damage.
In the event that this information does not help you resolve
your problem, please contact our service centre. Never
attempt to repair the appliance yourself!
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f Discharge batteries prior to disposal!
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of
the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equip-
ment Directive 2012/19/EC (WEEE). In accordance
with this, the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge by local
collection points or recycling centres.
The packaging for this product is made from recy-
clable materials. Dispose of this in an environmentally
friendly manner by recycling it.