Manuels Connexes pour Alesis USB Studio Drum Kit
Sommaire des Matières pour Alesis USB Studio Drum Kit
- Page 1 USB STUDIO DRUM KIT QUICKSTART ASSEMBLY MANUAL GUÍA RÁPIDA DE ARMADO GUIDE D’ASSEMBLAGE RAPIDE MANUALE RAPIDO DI MONTAGGIO AUFBAUANLEITUNG...
- Page 2 BOX CONTENTS L-SHAPED ROD DRUM KEY HEX WRENCH 1/4” CABLE SNAKE DRUM STICK CYMBAL ROD DRUM PADS (SHORT) HI-HAT HI-HAT PEDAL CYMBAL ROD (LONG) CRASH HORIZONTAL TUBE VERTICAL TUBE W/ BASS DRUM PAD 3 TUBE RIDE CONNECTORS STRAIGHT TUBE W/ CENTER RACK STRAIGHT TUBE W/ CLAMP (SHORT)
- Page 3 ASSEMBLING THE DRUM RACK CÓMO ARMAR EL BASTIDOR DE LA BATERÍA | ASSEMBLAGE DU SUPPORT POUR BATTERIE MONTAGGIO DEL RACK DELLA BATTERIA | AUFBAU DES DRUMRACKS 1 :::::::::: • Lay the 2 horizontal tubes (L) on the ground. Then, using the drum key, unscrew the bolts connecting the metal rod to the tube connectors (circled in the picture).
- Page 4 5 :::::::::: • Take the two vertical tubes (M and N) and insert them into the tube connectors of the two horizontal tubes (L). Please insert part M into the horizontal tube on your left, and part N into the horizontal tube on your right. •...
- Page 5 8 :::::::::: • Attach the short tube (P) to the bottom tube connector, and attach the long tube with 2 clamps (R) to the top connector on the vertical tube on your left (M). These two tubes will be used for the hi-hat and snare pads, as well as the module.
- Page 6 MOUNTING THE CYMBALS CÓMO MONTAR LOS PLATILLOS | MONTAGE DES CYMBALES MONTAGGIO DEI PIATTI | MONTAGE DER CYMBAL PADS 1 :::::::::: • Begin by connecting the cymbal rods (G1 and G2) to the rack. Connect the longer cymbal rods (G2) to the center rack tube (O). Connect the shorter cymbal rod (G1) to the upper tube (R) on the left side of the rack.
- Page 7 MOUNTING THE DRUM PADS CÓMO MONTAR LOS PADS DE TAMBORES | MONTAGE DES PADS MONTAGGIO DEI PAD DELLA BATTERIA | MONTAGE DER DRUM PADS 1 ::::::::: • Take the four L-shaped rods (D) and connect them to each of the four drum pads (I), as shown in the picture.
- Page 8 PLACING THE PEDALS CÓMO COLOCAR LOS PEDALES | POSITIONNEMENT DES PÉDALES POSIZIONAMENTO DEI PEDALI | AUFSTELLEN DER PEDALE 1 :::::::::: • Place the bass drum pad on the ground, underneath the center rack. Place the included hi-hat pedal (H) on the left side of the rack. •...
- Page 9 MOUNTING THE Trigger|iO MODULE CÓMO MONTAR EL MÓDULO Trigger|iO | MONTAGE DU MODULE Trigger|iO MONTAGGIO DEL MODULO Trigger|iO | MONTAGE DES Trigger|iO MODULS 1 :::::::::: • Take the Trigger|iO module out of the box. Position the mounting base (S) and secure it to the module, using the four mounting screws (T).
- Page 10 CONNECTING THE Trigger|iO MODULE CÓMO CONECTAR EL MÓDULO Trigger|iO | BRANCHEMENT DU MODULE Trigger|iO COLLEGAMENTO DEL MODULO Trigger|iO | ANSCHLUSS DES Trigger|iO MODULS Please study the following connection diagram to hook up your pads and pedals to the Trigger|iO module: Estudie el siguiente diagrama para saber cómo conectar sus pads y pedales al módulo Trigger|iO: Examinez bien le schéma de raccordement afin de brancher les pads et les pédales au module Trigger|iO: Studiare attentamente il seguente schema per il collegamento dei pad e dei pedali al modulo Trigger|iO:...
- Page 11 7-51-0308-C...
- Page 12 www.alesis.com...