Skil RAS800 Consignes De Fonctionnement/Sécurité page 18

SWITCH OPERATION (Fig. 18)
This section explains the operation and features
of the switch box assembly (B) prior to plugging
the power cord into a power outlet. The intent is
to familiarize the user with the switch operation
without actually turning ON the router.
The switch box (12) (Fig. 18) incorporates a
lockout key (13) to help prevent unauthorized
use by others.
•
The lockout key (13) is the yellow part in
the top of the red plastic paddle. The yellow
lockout key must be completely inserted into
the top of the red plastic paddle and switch
box (12) before the paddle can be turned ON.
•
The circuit reset button for the switch box (12)
is on the bottom right side of the box.
plugged into an electrical outlet before
proceeding any further.
1. Make sure the yellow lockout key (13) is
completely inserted in the top of the red
plastic paddle.
2. To turn the router ON, lift the red plastic
paddle up to the ON position.
3. To turn the router OFF, press the red plastic
paddle to the OFF position.
ON
(UP)
Router Table Operation
Make sure that the
extension cord is not
13
OFF
(DOWN)
FIG. 18
12
Switch box
assembly
Red
plastic paddle
(ON/OFF switch)
4. To prevent unauthorized use, the switch
can be disabled by removing the yellow
lockout key (13) completely from the top of
the red plastic paddle.
18
Circuit
reset button
13
Yellow
lockout key
13