Hopkins vueSMART 50050 Manuel D'installation page 6

PHYSICAL INSTALLATION CONT'D
6. Place the camera in the bracket
* Logo on camera should be facing upwards, with antenna
connection on the right side
7. Leave a "loop" or slack in the installation cable
to help prevent water from getting into the trailer
* We recommend applying silicone around the outside of
the mounting bracket and trailer housing to prevent water
from getting into the trailer
8. After installation is complete, adjust the camera
to proper viewing angle by rotating the camera
up or down by hand
9. Optional antenna bracket included. Install on
trailer as shown to hold antenna in position
6