Radio Basic Operations; Listening To The Radio; Searching A Station Automatically: Auto Search - JVC KD-LX30R Manuel D'instructions

RADIO BASIC OPERATIONS

Listening to the radio

You can use either automatic searching or manual searching to tune into a particular station.

Searching a station automatically: Auto search

1
1
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen
to an FM broadcast.
2
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in FM stations only with strong signals
This function works only while searching FM stations, including SSM preset (see page 8).
1 Press MODE BAND.
"MODE" appears on the lower part of the display, and the number buttons can work as
different function buttons.
2 Press LOCAL, while "MODE" is still on the display, so that the LOCAL indicator lights up on
the display.
Each time you press the button, the LOCAL indicator lights up and goes off alternately.
6
1-
LOCAL
MODE BAND
2
Select the band.
1 Press SOURCE (ATT) to select AM or FM as the source.
2 If necessary, press and hold MODE BAND to select the
FM band number (FM1, FM2 or FM3.)
Each time you press the button, the FM band changes
as follows:
To search stations of
higher frequencies
To search stations of
lower frequencies
1-
2 1
FM1
Selected band appears.
Start searching a station.
When a station is received, searching stops.
2
FM2 FM3