Instructions For Use; Remedies; Routine Maintenance And; Scrapping - Sicam SAFETY BOX 1500 Manuel D'instructions

Study and abide by all the warnings and instructions because, in the case of an explosion, the rim, tire and
counterweights can be blasted upwards and outwards with sufficient force to kill or seriously injure operators or
1) Carefully check that the rims and tires are not worn or defective and that they are correctly matched for size.
2) Keep the work area free from people.
3) Check that there are no balancing weights mounted on the rim before starting to inflate the tire.
4) Check that the door is closed correctly and locked.
After the explosion of a tire the efficiency of the device must be verified by professionally qualified personnel
MALFUNCTIONS: CAUSES AND POSSIBLE REMEDIES
malfunctions
The manometer does not inflate
The valve leaks
Other possible malfunctions are largely technical in nature and must be checked and resolved by
TO GUARANTEE THE EFFICIENCY AND CORRECT FUNCTIONING OF THE MACHINE IT IS ESSENTIAL TO CLEAN IT AND TO
CONDUCT PERIODIC ROUTINE MAINTENANCE. THE OPERATIONS OF ROUTINE MAINTENANCE MUST BE CARRIED OUT
BY THE USER ACCORDING TO THE MAKER'S INSTRUCTIONS GIVEN BELOW:
MECHANICAL PARTS: Keep the moving mechanical parts clean and lubricate them with oil or grease.
INFLATION MANOMETER: periodically check the figures on the manometer inflation scale.
SAFETY VALVE: periodically check the opening and closing of the inflation circuit by repeatedly opening and
closing the door lock.
Since the SAFETY BOX 1500
laws in force.
•
FOR ANY MACHINE MALFUNCTIONS CONSULT THE SECTION: "MALFUNCTIONS: CAUSES AND POSSIBLE REMEDIES". ANY
OTHER MALFUNCTIONS MUST BE CHECKED BY PROFESSIONALLY QUALIFIED PERSONNEL.
•
IN ALL CASES CONTACT THE ASSISTANCE SERVICE OF A SICAM EQUIPMENT AUTHORIZED DEALER. FOR PROMPT
ASSISTANCE IT IS IMPORTANT, AT THE TIME OF THE CALL, TO SPECIFY THE MACHINE MODEL, THE PRODUCTION NO. (FOUND
ON THE IDENTIFICATION PLATE), AND THE TYPE OF MALFUNCTION.
ANY WORK ON THE PNEUMATIC SYSTEM MUST ONLY BE CARRIED OUT BY
•
THE EXPLODED DRAWINGS ON THE FOLLOWING PAGES SHOW THE COMPONENT PARTS OF THE DEVICE.
THE MAKER DENIES RESPONSIBILITY FOR DAMAGE RESULTING FROM THE MALFUNCTIONING OF
COD.700090 Rev. 1

INSTRUCTIONS FOR USE

and, if necessary, replace any damaged parts or the entire device.
1. The door is not correctly closed.
2. There is one or more kinked hose
3. Defective valve
1. Faulty valve.
2. Valve not fitted correctly in its seat.
3. Valve shutter jammed.
professionally qualified personnel
ROUTINE MAINTENANCE
machine cleaning and maintenance by the user
is categorized as special refuse, it should be disposed of according to the

TECHNICAL ASSISTANCE AND SPARE PARTS

QUALIFIED PERSONNEL
SPARE PARTS MUST BE ORDERED
FROM SICAM EQUIPMENT AUTHORIZED DEALERS
NON-ORIGINAL SUBSTITUTED PARTS
WARNING !
bystanders.
WARNING !
causes
(for all versions)

SCRAPPING

WARNING!
WARNING!
EXCLUSIVELY
14
possible remedies
1. Close the door properly and ensure that
the lock is fully turned.
2. Replace kinked hoses
3. Replace valve
1. Replace valve
2. Refit the valve correctly.
3. Remove the valve, identify fault and
repair or replace.
!
PROFESSIONALLY
.
.