LaserLiner SmartVision-Laser Mode D'emploi page 10

1
2
Horizontal and vertical levelling
Release the transport restraint, set the ON/OFF switch to „ON".
The laser cross will appear. The laser lines can be switched
individually with the selection button.
LASER
The transport restraint must be released for horizontal
and vertical levelling. The LED shows a permanent
!
green light. The laser lines flash and the LED lights red
as soon as the device is outside the automatic levelling
range of 5°. Position the device such that it is within
the levelling range. The LED switches back to green
and the laser lines stop flashing (steady light).
10
EN
2
3
4
5
6
LASER LASER
1 Laser line selection button
2 LED levelling
red: levelling off
green: levelling on
3 Battery compartment
(backside)
4 ON / OFF switch,
transport retainer
5 Laser output windows
6
1/4" tripod threads
(bottom)
LASER