Switching On And Off; Care And Maintenance - Hilti SFE 2-A12 Notice D'utilisation Originale

6.3 Switching between forward (clockwise) and reverse rotation
(counter-clockwise)
An interlock prevents switching while the motor is running. The control
switch is locked when the forward/reverse switch is in the middle
position (switch-on interlock).
1. Operate the forward/reverse switch.
▶ The switch-on interlock is active.
2. Operate the forward/reverse switch.
▶ The direction of rotation is set as desired.

6.4 Switching on and off

1. Press the control switch.
▶ The power tool starts.
Speed can be controlled steplessly right up to maximum by varying
how far the control switch is pressed in.
2. Release the control switch.
▶ The power tool switches off.
6.5 Screwdriving
1. Set the torque. → page 11
2. Set the direction of rotation to forward (clockwise) or reverse (counter-
clockwise). → page 12
3. Press the control switch. → page 12
6.6 Drilling
1. Set the torque setting ring to the
2. Set the direction of rotation to forward (clockwise). → page 12
3. Press the control switch. → page 12
7

Care and maintenance

WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance
tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these can attack the plastic parts.
12 English
2
symbol.
2236949
*2236949*