EINHELL SKA 2503 Dual C+H Mode D'emploi page 27

Anleitung_SKA_2503_Dual_C_H_SPK7:_
The higher the outdoor temperature, the higher
the attainable indoor temperature
B) Heating mode
1. Press the "ON/OFF" key to switch on the device.
2. Press the "MODE" key until the "Heating" mode
icon appears in the display.
3. Press the "Swing" key. The air flow is adjusted
upwards/downwards. Press the key twice to lock
the slats in their current position.
4. Press the "FAN" key to select the fan speed:
Automatic -> Slow -> Medium -> Fast
5. Press the "+" or "-" key to set the desired
temperature.
Notes!
The heating mode will only work if the room
temperature set is higher than the current room
temperature. When the set room temperature is
reached, the outdoor compressor stops. The
centrifugal fan of the indoor device circulates the
air in the room.
The room temperature can be set between 16°C
and 30°C with the remote control.
The attainable room temperature is a factor of
local conditions and the outdoor temperature.
The cooler the outdoor temperature, the lower
the attainable room temperature.
Heating mode is only designed for spring and
autumn (up to 0°C).
C) Dehumidifying mode
1. Press the "ON/OFF" key to switch on the device.
2. Press the "MODE" key until the "Dehumidifying"
mode icon appears in the display.
3. Press the "Swing" key. The air flow is adjusted
upwards/downwards. Press the key twice to lock
the slats in their current position.
4. Press the "+" or "-" key to set the desired
temperature.
Notes!
The room temperature can be set between 16°C
and 30°C with the remote control.
D) Automatic mode
1. Press the "ON/OFF" key to switch on the device.
2. Press the "MODE" key until the "Automatic" mode
icon appears in the display. The device auto-
matically switches to cooling, fan or heating mode,
depending on the current room temperature.
3. Press the "FAN" key to select the fan speed:
Automatic -> Slow -> Medium -> Fast
E) Sleep function
1. Press the "ON/OFF" key to switch on the device.
2. Press the "MODE" key until the "Cooling",
30.07.2008 12:16 Uhr Seite 27
"Dehumidifying" or "Heating" mode icon appears in
the display.
3. Press the "Swing" key. The air flow is adjusted
upwards/downwards. Press the key twice to lock
the slats in their current position.
4. Press the "FAN" key to select the fan speed:
Automatic -> Slow -> Medium -> Fast
5. Press the "+" or "-" key to set the desired
temperature.
6. Press the "Sleep" key to activate the sleep
function.
Notes!
If the cooling or dehumidifying mode is set in
conjunction with the sleep function, the set room
temperature increases (1°C during the first hour
and 2°C during the second hour) in order to
prevent overcooling.
If the heating mode is set in conjunction with the
sleep function, the set room temperature
decreases (1°C during the first hour and 2°C
during the second hour) in order to prevent
overheating.
F) Timer settings (for automatically switching the
equipment on/off)
Note:
First set the current time using the "Clock" key.
1. "TIMER ON" (equipment ON timer) key
This key is pressed to automatically switch on the
unit.
Press the "TIMER ON" key. "ON" will flash next to
the time on the remote control display. Set the time
when you want the system to switch on using the "+"
and "-" keys. Press the "TIMER ON" key again to
confirm the time you have entered. "ON" will now
appear permanently. Press the "TIMER ON" key
again to delete the "unit ON timer" setting. "ON" will
go out.
2. "TIMER OFF" (equipment OFF timer) key
This key is pressed to automatically switch off the
unit.
Press the "TIMER OFF" key. "OFF" will flash next to
the time on the remote control display. Set the time
when you want the system to switch off using the "+"
and "-" keys. Press the "TIMER OFF" key again to
confirm the time you have entered. "OFF" will now
appear permanently. Press the "TIMER OFFN" key
again to delete the "unit OFF timer" setting. "OFF"
will go out.
3. "TIMER ON / TIMER OFF" combination keys
You can program the time when you want the system
to switch on and when you want it to switch off using
GB
27