TC Electronic Icon Serie Mode D'emploi page 24

24
TC2290 User Manual
When a preset is assigned a favorite slot number:
-The preset is part of the 100 presets that can be recalled on the
hardware unit
-The favorite number will be displayed on the hardware unit when recalled
-The favorite number will be locked so that other presets can not be
assigned to the same favorite slot number. This is shown in the Favorite
menu by graying out the number in question.
-The favorite number will be displayed in brackets when you browse the
presets menu
You can remove the favorite assignment by selecting the "Remove Assignment"
feature in the Favorite menu, then saving the preset.
Sort only favorites
The 'Sort only favorites' option in the preset menu allows the UP/DOWN arrows
on the hardware unit to scroll only through the favorites list. Otherwise, scrolling
goes through all presets.
Make Current Preset Default
Selecting 'Make current preset default' will cause this preset to appear every
time a new instance of the plug-in is created.
Reveal User Preset Folder in Explorer
To change the name of a preset, select 'Reveal User Preset Folder in Explorer'
and modify the file name. This will open a Finder (Mac) or Explorer (PC) window
where the user presets are stored. You can rename as well as delete, copy and
paste presets. This allows you to share presets with other users online, simply
pasting the new ones in this folder.
8. Software Updates
New versions of the software may be released to add new features and improve
performance. Updates can be detected from the plug-in directly and can be
installed after download from the website. See Chapter 2 for plug-in installation.
The hardware unit firmware will be included in each plug-in update.
If the 'Automatically check for updates' option is checked inside the update
menu, the red dot will appear on the settings icon when a new plug-in
is available.
Click the gear icon and select "Check for Updates" to perform a scan.
8.1 Hardware Unit Software Updates (optional)
After you have installed a new plug-in, the system will detect mismatched
firmware and indicate a need for update via a small red dot on the gear icon.
Click the "Upgrade to x.x.xx" field to start the update. Progress will be indicated
in the plug-in, and the Feedback LED on the hardware unit will flash.