Change Door Panels (Optional) - Allen + Roth 2317FM-33-202 Mode D'emploi

ASSEMBLY INSTRUCTIONS (CONT'D)
NOTE: Use the pre-assembled levelers on the
base of the fireplace to level the unit. Twist the
levelers counter-clockwise to increase the height,
twist the clockwise to decrease the height.

CHANGE DOOR PANELS (OPTIONAL)

The pre-installed glass door panels can be switched out with the included wood door panels (L).
1. Remove the silicone trim along the outer edges of the glass panel on the inside of the door. Start
at a corner and pull to remove the four pieces. Be careful not to damage the silicone trim as it will
be used to secure the new panel.
2. Remove the glass panel from the door frame, then insert the included wood door panel (L).
3. Using your finger press the silicone trim back into place. Move around the outer edge of the
panels until all four sides are secure.
1
2
1
4
2
3
L
14
3
2
1
3
4