HBM MC2A Manuel D'emploi page 6

6
MC2A
Reconstruction and modifications
HBM's express consent is required for modifications regarding the MC2A
construction and safety. HBM does not take responsibility for damage result-
ing from unauthorized modifications.
In particular, repair and soldering works on the boards are prohibited. If com-
plete componentry is replaced use original HBM components, only.
Qualified personnel
The device may be used by qualified personnel, only; the technical data and
the special safety regulations must in any case be observed. When using the
device, the legal and safety regulations for the respective application must
also be observed. The same applies if accessories are used.
Qualified personnel means: personnel familiar with the installation, mounting,
start-up and operation of the product, and trained according to their job.
Maintenance and repair work on an open device with the power on should
only be undertaken by trained personnel who are aware of the above-men-
tioned dangers.
HBM A1974−2.2 en/de/fr