HiTRAx 42.7007 Mode D'emploi page 8

TFA No. 42.7007 Anleitung_10/10
HiTRAX PULSE
– Heart rate monitor
• Press SET/REST button (reverse) or START/STOP button (forward) to
adjust the year. Press and hold the buttons for fast setting.
• Press MODE button. The month digits start flashing.
• Press SET/REST (reverse) or START/STOP (forward) button to adjust the
data (flashing).
• Press MODE button to select the next digits. The sequence is shown as
follows:
➞ ➞ ➞
YEAR MONTH DAY
• When setting 12/24Hr, press SET/REST button to select 12-hour or 24-
hour display format. If 12-hour display format is selected, there will be
a sun for daytime and a moon for nighttime.
• The actual weekday will be automatically marked in the lower display.
3.1.2 Backlight
• Press EL button.
• The backlight will light for 3 seconds.
3.1.3 Personal settings
• Setting the Age
• Press MODE button to select to view "Age".
• Press START/STOP button to set the age.
• Hold the button, you will enter fast mode.
• Please note that the numbers only run upwards.
• The setting range is between 5 and 99 years (Default: 16 years).
• Setting the weight (KG)
• After setting the age press SET/REST button.
• "KG" appears on the display.
• Set your weight with START/STOP button.
• Please note that the numbers only run upwards.
• The setting range is between 20 - 199 KG (Default: 50 KG).
• Setting the maximum oxygen uptake (VO2 = VO2 max.)
• After setting the weight press SET/REST button again.
• "VO2" appears on the display.
14
21.10.2010 9:25 Uhr
➞ ➞
HOUR MINUTE 12/24HR
Seite 8
HiTRAX PULSE
– Heart rate monitor
• Set your maximum oxygen uptake with START/STOP button.
• Please note that the numbers only run upwards.
• At the age of 20-30, the average value is between 35-40 ml/min/kg.
Top athletes can peak values of 80-90 ml/min/kg.
• The setting range is between 10 - 94 ml/min/kg (Default: 40).
• Indication of maximum heart rate (MHR)
• After setting the maximum oxygen uptake press SET/REST button
again.
• "MHR" appears on the display.
• The maximum heart rate (MHR) is calculated by using the below for-
mula: MHR = 220 - age of user.
• Indication of relative heart rate (%)
• After calling up the maximum heart rate, press SET/REST button
again.
• "%" appears on the display.
• In addition to absolute heart rate reading the watch also includes a
relative heart rate reading to the user. The relative heart rate is the
percentage that compares the acquired heart rate with the maxi-
mum heart rate.
• After all adjustments are completed, press MODE button to exit the
setting mode. If there is no button operation for about 1 minute in set-
ting mode, the watch will return back to normal mode automatically.
4. Operation
4.1 4.2 Equipping the chest strap
• Attach the transmitter to the elastic strap pro-
vided. Put the round fastener at the elastic strap
vertically from the bottom up within the cut-
out at the end of the transmitter part. Pull
the elastic strap outwards and push the round
fastener firmly into the cut-out until it snaps in.
15