Napoleon DLKIX4 Guide Rapide page 3

CONSISTENT THROUGHOUT.
3
3
3
3
6
6
3
3
7. Place the locating feature of log #7 into the
PLACE TEXT BOX HERE.
6
6
locating hole of log #1. Ensure the opposite NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
end of log #7 rests to the left of the feature hole
3 3
of log #4.
IF SPACE IS LEFT OVER, USE THIS BOX TO
SHOW CORRECT FINAL LOG
PLACEMENT WITH PHOTOS.
IF NOT, USE BOXES AS ABOVE.
Glowing Embers
WARNING
!
• Completely blocking the burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed
ignition.
IF APPLICABLE, USE THIS BOX TO SHOW
Tear the embers into pieces and loosely layer above the burner ports covering the burner area. Care should be
"NATURAL GAS ONLY" LOG PLACEMENT.
taken to shred the embers into thin, small irregular pieces as only the exposed edges of the fi bre hairs will glow.
The ember material will only glow when exposed to direct fl ame; however, care should be taken to not
block off the burner ports.
Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. PHAZER™
logs glow when exposed to direct fl ame. Use only certifi ed "glowing embers" and PHAZER™ logs available from
your local authorized dealer / distributor.
Modèles Gaz Naturel Seulement:
note:
PLACE TEXT BOX HERE.
Ensure to place the glowing embers on the front row, ahead of the front burner ports.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
Charcoal Embers
WARNING
!
• Do not block or close off the burner ports. Blocked ports can cause an incorrect fl ame pattern, carbon
deposits and delayed ignition.
• When supplied, charcoal embers, charcoal lumps and vermiculite are not to be placed on the burner.
Randomly place the charcoal embers along the front and sides of the log support in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
note:
Charcoal embers are not to be placed on the burner.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
4
4
1
1
2
2
4
4
1
1
2
2
7
7
4
4
1
1
2
2
7
7
4
4
3
3
6
6
5
5
3
3
5
6
5
6
3
3
8. Place locating features of log #8 into the
5
5
6
6
NOTE: ENSURE NOMENCLATURE IS
locating hole of log #6 and remaining locating
hole of log #2.
3
3
IF SPACE IS LEFT OVER, USE THIS BOX TO
SHOW CORRECT FINAL LOG PLACEMENT
IF NOT, USE BOXES AS ABOVE.
IF APPLICABLE, USE THIS BOX TO SHOW
"PROPANE ONLY" LOG PLACEMENT.
Modèles Propane Seulement
NOTE: ENSURE NOMENCLATURE IS
1(866)820-8686
CONSISTENT THROUGHOUT.
4
4
1
1
2
2
4
4
8
8
1
1
2
7
2
7
4
4
8
8
1
1
PLACE TEXT BOX HERE.
2
2 7 7
4
4
CONSISTENT THROUGHOUT.
WITH LINE DRAWINGS.
PLACE TEXT BOX HERE. 22.1A
CONSISTENT THROUGHOUT.
48.3
www.napoleon.com
22.2
5
5
5
5
5
5
W415-2810 / A / 07.28.20