Programming - Breville Precision Brewer Thermal BDC450 Mode D'emploi

Programming

AUTO START
Allows you to automatically start brewing at
preset time.
1. Set filter basket type for the amount of coffee
you're brewing.
2. Select your brewing mode.
3. Fill the water tank with enough fresh cold
water for the amount of coffee you're brewing.
4. Insert the brew basket with your desired
insert or paper filter and add coffee.
5. Insert the appropriate cup or the carafe with
the lid locked in place into the machine.
6. Press the AUTO START button.
FAST CUSTOMIZE
GOLD
BLOOM TIME
STRONG
BLOOM VOL.
MYBREW
BREW TEMP.
POUROVER
FLOW RATE
COLD BREW
REMOVE
SETTINGS
CARAFE LID
SET CLOCK STANDBY
KEEP WARM
DESCALE
FILL
SOUND EXIT
TANK!
TIME SINCE BREW
AUTO START AT
MIN
HEATING BLOOMINGBREWING
AM
PM
HR
7. The machine will prompt you to set the
time for Auto Start. Rotate the SELECT dial
to adjust Auto Start time press SELECT
dial to set. Auto Start is now set and the
machine will enter Auto Start mode, brewing
automatically at the set Auto Start time.
NOTE
If the clock hasn't been set, the machine will
prompt you to set the clock. Ensure the clock is
correct. The clock will reset every time the unit
is unplugged.
BDC450_455_USC_IB_I20_FA.indd 15
MAX
8. Pressing START|CANCEL will cancel
Auto Start.
SETTINGS
• SET CLOCK: Set the time displayed on LCD.
• SOUND: Sound volume is adjustable and also
can be turned off.
• STANDBY: Adjust time to automatically enter
STANDBY mode after a period of no use.
• FILTER TYPE: Factory setting is Flat basket,
adjustable when using the Cone filter
basket insert.
ENTERING STANDBY MODE
AT ANY TIME
Press the START|CANCEL button for
3 seconds.
DEGREE INDICATION PREFERENCE
(°C/°F)
To switch between °F and °C, press SELECT
dial and AUTO START button together. Rotate
SELECT dial to select, then press SELECT dial
to set.
CHILD-LOCK
To prevent children from possible danger,
child-lock feature is available. Press and hold
AUTO START button for 5 seconds. LCD will
display "CL" when it is locked. Repeat this again
or unplug the unit to unlock.
15
24/1/20 9:48 am