Axis Communications Q3505-SVE Guide D'installation page 18

AXIS Q3505–SVE Network Camera
NO TICE TICE
NO NO TICE
Not pulling the cable back could cause water to seep in and damage the product.
4. If using a multicable, remove the other cable gasket from the unit casing and discard it.
5. Pull the cables through the unit casing and attach the cable gaskets to the unit casing.
6. Connect the cables to the camera unit.
7. Pull the springs aside in the unit casing and attach the camera unit to the unit casing,
pulling the cables through the cable gaskets to shorten them as required.
8. Wind up the cable slack along the mounting bracket and attach the unit casing to the
mounting bracket with the two screws.
9. Verify that the cable gaskets are correctly mounted against the unit casing and the cables.
18