Mounting The Gatecloser - Locinox MAMMOTH-180 Mode D'emploi

8. Mounting the gatecloser

Place the Mammoth-180 on the gate or post and tighten the Quick-Fix bolts.
side hardware (L-wing side). Repeat this process for the Dino.
Left hand gate
A
Fig. 8A.1
After mounting the left side, install and tighten the right side hardware.
Fig. 8A.2
8
Fig. 8B.1
2-dimensionally adjustable (2 x 20 mm)
Fig. 8B.2
Always start by mounting the left
Right hand gate
B