Hilti NURON DWP 15-22 Notice D'utilisation Originale page 12

Noise values
Sound pressure level (L
Sound power level (L
WA
Uncertainty
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Inserting the battery
WARNING
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Open the battery-compartment cover.
2. Insert the battery.
▶ The battery engages fully in the mount.
3. Check that the battery is correctly seated and close the battery-compartment cover.
5.2 Retracting/extending transport handle
1. Press the two catches and hold them down in the
2. Pull the transport handle all the way out.
3. Release the catches.
▶ Both latches return to the
4. Check that the transport handle is securely engaged.
5.3 Topping up water supply
Always use the inlet filter when filling the tank. This prevents dirt from being drawn into the pump or
clogging the water supply.
1. Open the sealing cap.
2. Make sure that the inlet filter is seated in the filler neck.
3. Pour water into the tank.
▶ Do not overfill.
4. Screw the sealing cap on to the filler neck.
6 Operation
Before using the cordless water tank, check the battery (→inserted correctly) and the battery-
compartment cover (→closed).
Also study and follow all instructions relating to safety and operation in the corresponding operating
instructions of the system products used (e.g. diamond core drilling machine, diamond cut-off saw,
etc.).
1. Check that the tank filter is correctly installed.
8 English
)
pA
)
position.
75.9 dB(A)
89 dB(A)
3 dB(A)
position.
2328838
*2328838*