Klarstein CLEARCUBE Mode D'emploi page 24

EN
24
Problem
Ice cube is too weak and
thin.
Ice making cycle is
normal but no ice is
made.
No water in the unit,
but the "REFILL WATER"
indicator is not on, unit
can not make ice cube.
Possible cause
The ambient is too hot.
Ambient temperature
or water temperature in
inner tank is too high.
Refrigerant liquid
leakage.
Pipe in the cooling
system is blocked.
The water is not enough
pure. Maybe you have
used the salt water or
others.
The wall of the lower
tank underneath the ice
basket is too dirty.
Suggested solution
Turn off you unit first,
then press "ON/OFF"
button again for more
than 5 seconds to turn
on the unit again. It
will lengthen each ice-
making cycle time.
Please run the ice maker
below 32℃ and pour
colder water into tank.
Verify by a qualified
technician.
Verify by a qualified
technician.
Chang to the normal
potable water. The salt
water is prohibited, it will
damage your unit.
Clean this water tank.