Napoleon PHAZER MLKAX42 Guide Rapide page 2

Air
Gap
1. Place log #1 at the back of the burner,
ensuring the notch fi ts around the pilot shield
and is pulled forward tight behind the pilot
shield. Do not cover the air gap behind the
burner.
* NOTE: Place glowing embers to the front of the large clusters of ports. The burner has been designed
to have large fl ames in these locations. If not, blue fl ames will be present.
NOTE: Holes
Under Log
(not illustrated)
A1 A2
2. Place the holes in log #2 on A1 and A2.
4
Notch
4. Place the bumpout on log #4 into the notch in
log #2, resting the opposite end beside
the fi rst grate post.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
Notch
1
2
1
NOTE: Bumpout
Under Log
(not illustrated)
1 1
3
NOTE: Log
Hidden for
Clarity
Middle Burner Tube
1a. Apply glowing embers to the middle and
front burner tubes (not illustrated). *
NOTE: Holes
Under Log
(not illustrated)
1 1
2
3. Place the holes in log #3 on B1 and B2.
NOTE: Bumpout
Under Log g
(not illustrated) ted)
5
4
2
5. Place the bumpout on log #5 into the
notch in log #1, resting the opposite end
along the front grate.
• 1(866)820-8686
Front Burner Tube
og
rated)
3
B1 B2
Notch
1 1
3
W415-2105 / 07.12.19
• www.napoleon.com